豐田叉車電瓶選用特殊材料鉛銻配方，電池具有內阻低，自放電小，且耐過放電、過充電，循環壽命長，安全性能好等優點，適應各種環境下使用，產品規格齊全，循環次數可達1350次以上，出廠產品逐個進行嚴格檢測，質量穩定可靠，產品性能均達到JISC、IEC及國家JB等標準，氧復合原理設計：形成內部氧循環，放電特性優異，電池內阻小，極群緊裝配，完全充電狀態的電池完全固定，高效率氣體再化合，獨特生產工藝，增強板柵抗腐蝕能力，阻燃材ABS槽殼，符合UL94V-0標準，降低殼體燃燒可能，超強的承受深放電及大電流放電能力，具有過充及過放電自我保護性能，特殊隔板能保住電解液，再同時用強力壓緊正板活性物質，防止脫落，厚極板技術和獨特的膠體電解質配制灌加工藝保證了電池的使用壽命，豐田叉車電瓶采用KW合金， 在板柵鑄造時往鉛爐加入稀土金屬， 利用稀土金屬的惰性特點改變板柵的晶體結構， 使電池在浮充使用過程中極板被腐蝕的狀態由斷面腐蝕變為表面層腐蝕， 通過減少電池極板的被腐蝕進度從根本上是電池的壽命得到延長。叉車電瓶采用薄形極板的設計， 以提高電池大電流放電的性能. 另方面為了保證電池的使用壽命， 在電池電解液加入添加劑使電池在正常使用時的浮充電流降低42%-49%， 達到減少電池內部的電化學腐蝕速度， 使電池長壽命化。豐田叉車電瓶用內部化成技術， 同時電池極板的活性物質中加入導體Pb3O4的結晶物，使電池的正極板活物質利用率提高至46%， 克服以往電池的活物質利用率低下的難題， 使電池達到高質能比。歡迎來電咨詢更多叉車電瓶組配套方案。Toyota forklift battery use special materials lead antimony formula， the battery has low internal resistance， small self-discharge， resistance and over discharge， over charge， long cycle life， safety performance is good wait for an advantage， to adapt to various environments， product specification is complete， the cycles of up to 1350 times or more， the factory product carry on the strict inspection， quality stable reliable， the product performance meet the JISC， IEC and national standards such as JB， oxygen compound principle of design: the formation of internal circulation， oxygen discharge characteristic is excellent， battery internal resistance is small， very tight assembly， complete the battery charging status is completely fixed， high efficiency gas recombination， unique production process， strengthen board gate corrosion ability， flame retardant material ABS shell， accord with standard of UL94V - 0， burning may reduce shell， the deep discharge under the super and large current discharge capacity， have overcharge and over discharge protection performance， special clapboard can keep the electrolyte， and at the same time with strong compaction are active substances， prevent fall off， thick plate technology and unique gel electrolyte preparation pouring process to ensure the service life of the battery， Toyota forklift battery with KW alloy， to lead when sheeting casting furnace add rare earth metals， using the inertia characteristics of rare earth metal change the crystal structure of plate grid， the batteries used in floating plate corrosion state by section in the process of corrosion is a surface corrosion， by reducing the corrosion progress of battery plate fundamentally extend battery life. Forklift battery using thin plate design， in order to improve the large current discharge performance of battery. The other aspects in order to guarantee the service life of the battery， the battery electrolyte adding additives to make battery during normal use of floating charge flow reduced by 42% - 49%， to reduce the electrochemical corrosion speed inside the battery， the battery with long life. Toyota forklift battery with internal into technology， and join in the active material of battery plate conductor Pb3O4 JieJingWu， make the positive plate of the battery to improve the utilization of living material to 46%， and overcome the challenge of previous battery live material utilization rate is low， the battery can achieve high quality ratio. Welcome to inquire more forklift battery group matching scheme.